Panasonic Palmcorder PalmSight PV-L557 - Camera Recording; Simple Recording Procedure

Camera Recording
Simple Recording Before you begin...
* Connect the Palmcorder to a power source.
¢ insert a cassette with record tab (see page 10).
1 Set the POWER switch to CAMERA.
The built-in Lens Cover opens.
EVF
PAUSE
Record/Pause
mode.
2 With the Viewfinder Eye Cup
against your eye, adjust the Vision
Adjustment Control to your eye-
sight.
3 Slide the TAPE SPEED Selector
to SP or SLP (refer to page 10).
recording.
The Tally Lamp and REC Indicator are
lit during recording.
RECORD
Press the RECORD/PAUSE again to
pause the recording.
Set the Power switch to OFF after
Note:
recording
is
finished.
* When your Palmcorder is aimed at excessively ¿To remove the cassette
bright objects, or bright lights, a vertical bar :
may appear in the picture. This is a normal In Record/Pause mode, slide the TAPE EJECT
characteristic of the CCD pick-up device. Try switch (refer to page 10).
to avoid this when possible.
20