Panasonic Palmcorder PalmSight PV-L557 - Camera Recording (cont.); Easy Edit Stand-by; Manual Easy Editing

Camera, Recording
Easy Edit Stand-by
If you stop recording but plan to resume within 24 hours, use the Edit Standby feature to
make a smooth transition between scenes.
1 Press RECORD/PAUSE while
recording.
Set the POWER switch to OFF and
leave the cassette in the Palmcorder.
edwhen ready to resume recording, set
the POWER switch to CAMERA and
press RECORD/PAUSE.
Note:
* If itis going to be longer than 24 hours before
you resume recording, you will need to use the
manual Easy Edit feature described below.
POWER Switch
Manual Easy Editing
For proper continuity when taping from the Stop mode, or after changing the Battery
Pack.
1 Set the POWER switch to VCR.
2 ® Press REWIND/SEARCH to go
back a few seconds on the tape.
(B Press PLAY to review the picture
on the Viewfinder.
© Press STILL at the location you
wish to continue your recording.
3 Set the POWER switch to CAMERA.
2E oss RECORD/PAUSE to continue
recording.
23