Panasonic Palmcorder Palmsight PV-L559 - Page 24

Camera Recording
Before you begin...
For a smooth transition between scenes if * Connect Camcorder to power source.
recording is stopped, and then started within * Insert cassette with record tab (page 13).
24 hours.
1 Press RECORD/PAUSE to stop
recording.
2 Set POWER to OFF and leave
cassette in Camcorder.
3 To resume recording, set POWER
to CAMERA,
4 Press RECORD/PAUSE to resume
recording.
Note:
3 ¢ Use Manual Easy Edit (below) if more than
24 hours before recording is resumed.
Manual Easy Editing
For proper continuity when taping from Stop mode or after attaching a new Battery.
Before you begin...
* Connect Camcorder to power source.
* Insert cassette with record tab (page 13).
1 Set POWER to VCR.
2 O) Press REWIND/SEARCH to
rewind a few seconds of tape.
O Press PLAY to review recording.
(9 Press STILL where you want to
continue recording.
3 Set POWER to CAMERA.
4 Press RECORD/PAUSE to resume
3 recording.
24 For assistance, call 1-800-211-PANA(7262)