Panasonic Palmcorder Palmsight PV-L559 - Playing Back Recordings

Pla ying Back Recordings
Playback on or or LCD Monitor Before you begin...
e Connect Camcorder to power source.
» Insert recorded tape.
1 Press LCD-OPEN and swing LCD
monitor fully open.
* If you want to playback on EVF,
close and lock LCD completely.
2 Set POWER to VCR.
¢ if tape has no record tab, auto
playback begins.
e LCD monitor turns on/off by the
POWER switch.
¢ Viewfinder shuts off when LCD is
fully opened and turns back on when
LCD is tocked closed.
+ Return LCD monitor to locked
position when not in use.
3 Playback function buttons.
@ REW(ind) : rewind tape.
© PLAY : play tape.
@ STOP : stop tape.
®© BRIGHT : adjust LCD
brightness.
@ VOLUME : Adjust volume of
speaker, or earphone
if connected.
Press “T” : Volume up(+).
Press “W” : Volume down(-).
- VOLUME +
VOLUME [-] 1111---- [+]
Note:
* Using LCD reduces battery
operating time.
« When earphone (M3 type: not
supplied) is connected to PHONE
(earphone) jack, speaker is muted.
jack
27