Panasonic Palmcorder Palmsight PV-L559 - Copying Tapes

Copying your Tapes (dubbing)
|
Source (Playing)
Camcorder
Out
VHF Connecting
Cable (not supplied)
Audio/Video Cable
(supplied)
Monitor with your TV
* Turn TV on and tune to VCR
channel (CH3 or CH4).
e Set VCR/TV Selector on VCR to VCR.
Before you begin...
* Make Camcorder-VCR connections
(see left).
* Turn both units on.
¢ Set VCR input signal to LINE.
Please see VCR owner's manual.
+ Set Camcorder POWER to VCR.
1 Insert a pre-recorded tape
into Camcorder and a blank tape with
record tab into VCR.
Press PLAY on Camcorder, then
press STILL at starting point.
Press REC, then STILL/PAUSE on
VCR.
Press STILL on Camcorder and
STILL/PAUSE on VCR again to start
copying.
a fF O N
Press STOP on both units to stop
copying.
Note:
* Camcorder will only playback tapes
recorded in SP or SLP mode.
+ Dubbing may reduce picture quality.
CAUTION:
Unauthorized exchanging and/or
copying of copyrighted recordings may
be copyright infringement.
31