Panasonic Palmcorder Palmsight PV-L559 - Page 35

Tally Lamp
Tally Lamp
The tally lamp can be set to come on or
stay off during recording.
New camcorder's default setting is ON.
Before you begin...
* Connect Camcorder to power source.
* Set POWER to CAMERA.
* Insert cassette with record tab (page 13).
1 Press MENU for MENU mode.
Press UP_A or DOWN Y to select
TALLY LAMP A
--- MENU --- PAGE 1/2
PROGRAMMED REC
TITLE i
; AUTO/MANUAL
. ; ON
STAND-BY RELEASE ; OFF
CLOCK SET
SELECT; PUSH v/4 KEY
SET > PUSH DISPLAY KEY
END : PUSH MENU KEY
2 Press DISPLAY to select:
ON — lamp lights during recording.
OFF= lamp stays off.
3 Press MENU to exit.
35