Panasonic Palmcorder PalmSight PV-L658 - Setting the Clock

Setting the Clock
Setting the clock is divided into four sections: Time Zone, Daylight Saving Time, Date
and Time, and Clock Battery. Follow instructions in the order presented.
Setting the Time Zone Before you begin...
« Connect the Camcorder to a power source.
The Camcorder is set to Eastern time « Set the POWER switch to CAMERA.
zone at the factory. If you live, or are Note:
traveling, in a different time zone, follow * When the POWER switch is set to VCR, the
the steps to select the appropriate time CLOCK SET menu will be displayed.
zone from the menu screen. * The Camcorder's clock may lose or gain up
to two minutes per month. Please adjust as
necessary (refer to page 16).
1 Press the MENU button to display
the MENU mode. Press UP 4 or
DOWN Y GIA to select
“i MENU - PAGE 1/2
PROGRAMMED REC
UAL
TALLY
LAMP
STAND-BY RELEASE ` OFF
Y
CT: PUSH W/d KEY
2 Press the DISPLAY button to display
the CLOCK SET menu. Press UP A or
DOWN Y Seo to select
i - CLOCK SET ---
: EASTERN
¡ AUTO
DATE/TIME : OOAM
JAN 11
SELECT; PUSH Wia KEY
SET : PUSH DISPLAY KEY
ENO : PUSH MENU KEY
Press the DISPLAY button to display
the SELECT TIME ZONE menu. Press
UP A or DOWN Y repeatedly to
select desired time zone.
-- SELECT TIME ZONE -- -
ic PACIFIC
MOUNTAIN
SELECT; PUSH V/A KEY
SET : PUSH DISPLAY KEY
E EA the DISPLAY button to fix the
Time Zone. The CLOCK SET menu
Note:
display
the
MENU.
When
you
travel
outside
the
eight
time
zone
To
exit
from
the
MENU
mode,
press
chart
above,
please
set
the
clock
manually
the
MENU
button.
(see page 16).
14