Panasonic Palmcorder PalmSight PV-L678 - Page 13

MENU Mode
MENU Mode Setting
--- MENU --- PAGE 1/2
PROGRAMMED REC
TITLE ; AUTO/MANUAL
TALLY LAMP ; ON
STAND-BY RELEASE ; OFF
CLOCK SET
SELECT: PUSH W/A KEY
: PUSH DISPLAY KEY
: PUSH MENU KEY
--- MENU --- PAGE 2/2
A
TIME LAPSE ; OFF
SELECT: PUSH V/A KEY
: PUSH DISPLAY KEY
: PUSH MENU KEY
Before you begin...
¢ Connect the Camcorder to a power source.
* Set the POWER switch to CAMERA.
1 Press the MENU button to display
the MENU mode.
©
©
=
=
to
0)
=
SN
mi
D
Q
Y LAM : ON
STAND-BY RELEASE ; OFF
Y
SELECT; PUSH V/A KEY
SET; PUSH DISPLAY KEY
END : PUSH MENU KEY
Press UP A or DOWN Y repeatedly
to select a menu item.
3 Press the DISPLAY button to set your
selection.
Ya PENA the MENU button to exit the
Menu mode.
Note:
+ The Camcorder will exit the Menu mode if,
after activation, none of the UP/DOWN(a/¥),
DISPLAY, or MENU buttons are pressed
within 5 minutes.
(O) PROGRAMMED REC (see page 27).
You can program the Camcorder to
start and stop recording at a preset
time.
© TITLE (see pages 42-44).
AUTO/MANUAL : 16 items
PHRASE : 10 items
© TALLY LAMP (see page 41).
The Tally Lamp comes on during
recording when set to ON.
(4) STAND-BY RELEASE (see page 25).
To resume recording from Stand-by
mode, when set to ON.
© CLOCK SET (see pages 14-16).
To set the clock, select CLOCK SET.
(6) TIME LAPSE (see page 40).
To set the TIME LAPSE, when
set to ON.
13