Panasonic Palmcorder PalmSight PV-L678 - Page 16

Setting the Clock l
Wa A atte Before you begin...
+ Connect the Camcorder to a power source.
The date and time are calculated, including » Set the POWER switch to CAMERA.
leap year, up to DEC 31 2096. Note:
e When the POWER switch is set to VCR, the
CLOCK SET menu will be displayed.
1 Press the MENU button to display
the MENU mode. Press UP A or
DOWN Y repeatedly to select
CLOCK SET] wea
e
¥
SELECT: PUSH F/A KEY
SET : PUSH DISPLAY KEY
END : PUSH MENU KEY
2 Press the DISPLAY button to display
the CLOCK SET menu. Press UP A
or DOWN Y repeatedly to select
DATE/TIME §
--- CLOCK SET ---
TIME ZONE ; EASTERN
D. S. T. ; AUTO
GEXEFARNS ; 12:00 : 00AM
JAN 1 1998
SELECT: PUSH W/a KEY
SET : PUSH DISPLAY KEY
: MENU KEY
ed Press the DISPLAY button to display
the DATE/TIME SETTING menu.
- -- DATETIME SETTING - - +
xi sn los
-12:00:00AM
JAN 1 1998
SELECT: PUSH W/a KEY
SET : PUSH DISPLAY KEY
71 ENN UP A or DOWN Y repeatedly
(or hold down) to enter the desired
numbers, then press the DISPLAY
button to fix that portion and move on.
Adjust the flashing digits for the hour,
minute, month, day, and year.
When you finish setting the year, the
clock starts operating, and the CLOCK
SET menu appears.
Press the MENU button to display the
MENU.
To exit from the MENU mode, press
the MENU button.