Panasonic Palmcorder PalmSight PV-L678 - Page 26

Camera Recording
Easy Edit Stand-by
If you stop recording but pian to resume within 24 hours, use the Edit Standby feature to
make a smooth transition between scenes.
1 Press RECORD/PAUSE while
recording.
Set the POWER switch to OFF and
leave the cassette in the Camcorder.
3 When ready to resume recording, set
POWER
the
POWER
switch
to
CAMERA
and
Switch
press
RECORD/PAUSE.
Note:
RECORD/
*
If
itis
going
to
be
longer
than
24
hours
before
you resume recording, you will need to use the
PAUSE manual Easy Edit feature described below.
Manual Easy Editing
For proper continuity when taping from the Stop mode, or after changing the Battery
1 Set the POWER switch to VCR.
20 Press REWIND/SEARCH to go
back a few seconds on the tape.
® Press PLAY to review the picture
on the Viewfinder.
© Press STILL at the location you
wish to continue your recording.
D set the POWER switch to CAMERA.
4 Press RECORD/PAUSE to continue
recording.