Panasonic Palmcorder PalmSight PV-L679 - Page 12

Supplying Power
Connect AC Adaptor VCR DC OUT
to Camcorder DC IN with supplied
DC Power Cable.
Plug in AC Adaptor.
POWER Lamp lights.
Notes:
VCR DC OUT Connector * AC Adaptor cannot power Camcorder while
charging Battery.
e When not in use, unplug AC Adaptor from AC
outlet. (Adaptor uses 1.2 W of electricity while
plugged in.)
‘CAUTION:
This unit will operate on 110/120/220/240V AC. An AC plug adaptor may be
required for voltages other than 120V AC. Please contact either a local or foreign
electrical parts distributor for assistance in selecting an alternate AC plug.
We recommend using the accessory power plug adaptor (VJSS0070) in an area
which has special AC outlets.
Car Battery Cord (Optional)
Connect PV-C16 Car Battery Cord
(optional) to Camcorder DC IN.
NS
SAN
2
A
Start
engine
first.
DC
IN
`
B
Plug
Car
Battery
Cord
into
Connector eil Lo ES Cigarette lighter socket.
* If Car Battery cord fuse needs
replacing, use exact current rating
i (in amps).
Cigarette Lighter Notes:
Socket (12V) s This cord only works in vehicles equipped
e with DC 12V (negative ground) battery.
Check with your car/truck dealer. Use
only specified car battery cord.
* To avoid blowing the car battery cord
fuse, do step 2 in the proper order.
e Running vehicles must be well ventilated.
Car Battery Cord Cigarette e When not in use, disconnect cigarette
(optional) Lighter Plug lighter plug.
12