Panasonic Palmcorder PalmSight PV-L679 - Playing Back Recordings

_ Playing Back Recordings
SEENEN
Aa Before you begin...
+ Connect Camcorder to power source,
» Insert recorded tape.
1 Press LCD-OPEN and swing LCD
monitor fully open.
s lf you want to playback on EVF,
close and lock LCD completely.
2 Set POWER to VCR.
s if tape has no record tab, auto
playback begins.
*LCD monitor turns on/off by the
POWER switch.
e Viewfinder shuts off when LCD is
fully opened and turns back on when
LCD is locked closed.
e Return LCD monitor to locked
position when not in use.
MOH) €
— VOLUME +
3 Playback function buttons.
@ REW(ind) : rewind tape.
@ PLAY : play tape.
G STOP : stop tape.
© BRIGHT : adjust LCD
brightness.
. @ VOLUME ` Adjust volume of
speaker, or earphone
if connected.
Press “T” : Volume up(+).
Press “W” : Volume down(-).
VOLUME II. [+]
Note:
e Using LCD reduces battery
operating time.
* When earphone (M3 type: not
supplied) is connected to PHONE
Ee jack, speaker is muted.
jac
25