Panasonic Palmcorder PalmSight PV-L679 - For Your Information

Viewfinder/LCD Monitor Indications
Tape remaining and battery charge level can be displayed.
1 Set POWER to CAMERA.
2 Press DISPLAY repeatedly to
select the following displays.
Fifth First
press | 12:00:0044 press
P ¡initial scream) %
8P
REC
Fourth A Second
press press
Battery Tape E 1X ao RO noe Third | 1xem coum Ea
Remaining: Remaining: press
-Gal
-
(No
tape)
qa
FULL
E
Gd
FULL
GJ
ES
Gal
g
be
e
Tape
remaining
indicator
operates
a
few
EMPTY ae n= EMPTY seconds after tape starts moving.
Recording the Date and Time
1 Do steps 1 and 2 above to select
time/date,
date
only,
or
no
display.
x
SP
2 Start a recording (page 20).
s Only the Date and/or Time are
recorded.
DiSplav-0n Mode
No Indication, except Intelligent Titler (pages 41-43), will be
displayed.
Press DISPLAY and STOP together over 1 second.
Press DISPLAY repeatedly to remove time/date.
Indications are restored when Camcorder is turned off, and then
on again.
. 44