Panasonic Palmcorder Palmsight PV-L858 - Page 15

Setting the Clock
Setting the Daylight Saving Time
The clock will automatically adjust to daylight saving time.
Before you begin...
¢ Connect the Camcorder to a power source.
* Set the POWER switch to CAMERA.
Note:
* When the POWER switch is set to VCR, the
CLOCK SET menu will be displayed.
+ Daylight saving time feature will not function
if time zone is set to Hawaii or Samoa.
The Camcorder is preset to Daylight
Saving Time AUTO MIE you do not want
the clock to be automatically adjusted to
daylight saving time, please select OFF
by following steps 1-4,
I Press the MENU button to display the
MENU mode. Press UP A or DOWN Y
repeatedly to selecte Kelo Ep.
-- MENU --
ROGRAMMED
; AUTO/MANUAL
TALLY LAMP ; ON
STAND-BY RELEASE ; OFF
y
SELECT: PUSH V/A KEY
SET : PUSH DISPLA
END : PUSH MENU KEY
2 Press the DISPLAY button to display
the CLOCK SET menu. Press UP A or
DOWN Y repeatedly to select BEE.
Press the DISPLAY button to display
the DAYLIGHT SAVING TIME menu.
Spring (First Sunday in April): Press UP A or DOWN Y to select
In DAYLIGHT SAVING TIME: AUTO mode, AUTO or OFF.
the clock is automatically moved ahead one
hour.
1:00 a.m. 2:00 a.m.
SELECT: PUSH W/a KEY
SET : PUSH
s
DISPLAY
KEY
|
4
laa)
3:00
a.m.
4:00
a.m.
Press
the
DISPLAY
button
to
fix
the
Autumn (Last Sunday in October): DAYLIGHT SAVING TIME setting.
In DAYLIGHT SAVING TIME: AUTO mode, The CLOCK SET menu appears.
the clock is automatically turned back one Press the MENU button to display the
hour. MENU.
1:00 a.m. 2:00 a.m.
Paga
Saving
To
exit
from
the
MENU
mode,
press
S : the MENU button.
a
1:00 a.m. 2:00 a.m.
15
payers bulyay