Panasonic Palmcorder Palmsight PV-L858 - Color Digital Plain an a Dr

Color Digital Filter
This feature adds any of the six colors to the whole screen just like a color filter.
The addition of color will give your recordings special nuance.
Before you begin...
« Connect the Camcorder to a power source.
e Set the POWER switch to CAMERA.
* Insert a cassette with record tab (see page 12).
I Hold down the D. FILTER, NEG/POS
button for 2 seconds (approx.) to view
or record a negative image.
e The NEG. filter changes the picture
from a positive to a negative image.
Peores: the D. FILTER, NEG/POS
button repeatedly until the desired
color filter appears.
Normal image
(no Indication) 3
$ Press the D. FILTER, NEG/POS
NEG. NEG. ;
' button repeatedly until the normal
SEENA image appears.
ARREN vEL
RED Note:
; + During Digital Wipe or Digital Still/Strobe/Wide,
BLU the Color Digital Filter will not activate.
* Colored images will revert back to a normal
image when viewed in still mode.
38