Panasonic Palmcorder Palmsight PV-L858 - Aa Aa Ae ESEA R II E ONTO ANRA RETR

Tally Lamp
You can choose to have the Tally lamp come on or stay off during recording.
The default setting from the factory is ON mode.
46
Before you begin...
e Connect the Camcorder to a power source.
« Set the POWER switch to CAMERA.
* Insert a cassette with record tab (see page 12).
I Press the MENU button to display
the MENU mode. Press UP A or
DOWN ¥ wo to select
; ON
RELEASE ; OFF
TILE A
STAND-BY
CLOCK SET
y
SELECT: PUSH Via KEY
SET : PUSH DISPLAY KEY
ENO : PUSH MENU KEY
en the DISPLAY button to set ON
or OFF.
ON:
Tally Lamp comes on during recording.
OFF:
Tally Lamp and REC Lamp stay off
during recording.
ds the MENU button to set your
selection and exit the Menu mode.