Camera Recording
2
Before you begin...
• connect Camcorder to power source.
Built-in Twin Capsule • Insert cassette with record tab (page 13).
2-Way Microphone
System
JR
-I Set POWER to CAMERA.
Lens Cover opens. EVF
Tally Lamp
• Be sure POWER
is fully turned to
CAMERA
position.
2
Record/Pause
mode.
Look into Viewfinder and adjust
Vision Adjustment control to your
eyesight.
3
3
1
4
5
5
Slide TAPE _SPEED to SP or SLP
(page 13).
Press RECORD/PAUSE to start or
pause recording.
REC lamp lights during recording.
Tally lamp also lights if set to ON
(page 32).
Set Power to OFF when finished.
/ i \
• To remove cassette,
slide TAPE EJECT in Record/
Pause mode. (page 13).
WARNING:
• Do not leave the camcorder with the
EVF aimed directly at the sun. This
may cause damage to the internal
parts of the EVF.
• When Camcorder is aimed at excessively
bright objects, or bright lights, a vertical
bar may appear in the picture. This is
normal for the CCD pick-up. Try to avoid
this when possible.
21
To Next Page
Loading...
