Camera Recording
For a smooth transition between scenes if
recording is stopped, and then started
within 24 hours.
2 3
Before you begin...
• Connect Camcorder to power source.
• Insert cassette with record tab (page 13).
Press RECORD/PAUSE to stop
recording.
Set POWER to OFF and leave
cassette in Camcorder.
3
4
To resume recording, set
to CAMERA,
Press B,_ to resume
recording.
Note:
• Use Manual Easy Edit (below) if more than
24 hours before recording is resumed.
H LTA_.lat! _.ti _.L'Mi _ _ IiToll
For proper continuity when taping from
Stop mode or after attaching a new
Battery.
2
4
Before you begin,.,
• Connect Camcorder to power source.
• Insert cassette with record tab (page 13).
Set POWER to VCR.
2
3
O Press REWIND/SEARCH to
rewind a few seconds of tape.
_) Press PLAY to review recording.
Press STILL where you want to
continue recording.
Set POWER to CAMERA.
Press RECORD/PAUSEto resume
recording.
1
3
23
To Next Page
Loading...
