II III
For a smooth transition between scenes if
recording is stopped, and then started
within 24 hours.
Camera Recording
Before you begin...
• Connect Camcorder to power source.
• Insert cassette with record tab (page 13).
Press RECORD/PAUSE to stop
recording.
Set POWER to OFF and leave
cassette in Camcorder.
To resume recording, set POWER
to CAMERA.
Press RECORD!PAUSE to resume
recording.
2
3
Note:
• Use Manual Easy Edit(below) if more than
24 hours before recording is resumed.
For proper continuity when taping from
Stop mode or after attaching a new
Battery.
Before you begin...
• connect Camcorder to power source.
• insert cassette with record tab (page 13).
1
2
3
4
4
2
Set POWER to VCR.
Press REWIND/SEARCH to
rewind a few seconds of tape.
Press _ to review recording.
(_ Press STILL where you want to
continue recording.
Set POWER to CAMERA.
Press RECORD/PAUSE to resume
recording.
1
3
23
To Next Page
Loading...
