Panasonic Palmcorder PV-D308 - Basic Operation; Camera Recording

-> a hc iw
. .
Camera Recording
Simple Recording Before you begin...
* Connect the Camcorder to a power source.
* [nsert a cassette with record tab (see page 12).
1 Set the POWER switch to CAMERA.
The built-in Lens Cover opens.
EVF
* Make sure the
POWER switch is PAUSE
fully rotated to
the CAMERA
position.
Record/Pause
mode.
|
2
!
TAPE
1
With
the
Viewfinder
Eye
Cup
against your eye, adjust the Vision
Adjustment Control to your eye-
sight.
5 ee the TAPE SPEED Selector to
SP or SLP (refer to page 12).
74 sss RECORD/PAUSE to start
recording.
The Tally Lamp and REC Indicator are
lit during recording.
WARNING:
* Do not leave the Camcorder with the EVF
aimed directly at the sun as this may cause RECORD
damage to the internal parts of the EVF.
ANNO
Press
the
RECORD/PAUSE
again
to
pause
the
recording.
Set the Power switch to OFF after
recording is finished.
* To remove the cassette
In Record/Pause mode, slide the TAPE
EJECT switch (refer to page 12).
* When your Camcorder is aimed at excessively
bright objects, or bright lights, a vertical bar
may appear in the picture. This is a normal
characteristic of the CCD pick-up device. Try
to avoid this when possible.
22