Panasonic Palmcorder PV-D308 - Page 24

a
B^
Camera Recording | |
Easy Edit Stand-by
If you stop recording but plan to resume within 24 hours, use the Edit Standby feature to
make a smooth transition between scenes.
1 Press RECORD/PAUSE while
recording.
Set the POWER switch to OFF and
- leave the cassette in the Camcorder.
When ready to resume recording, set
POWER the POWER switch to CAMERA and
Switch press RECORD/PAUSE.
Note:
RECORD! * If itis going to be longer than 24 hours before
PAUSE you resume recording, you will need to use the
manual Easy Edit feature described below.
1 Set the POWER switch to VCR.
2 ® Press REWIND/SEARCH to go
back a few seconds on the tape.
(B Press PLAY to review the picture
on the Viewfinder.
© Press STILL at the location you
wish to continue your recording.
3 Set the POWER switch to CAMERA.
Abres: RECORD/PAUSE to continue
recording.