Electronic Viewfinder
Indications
Tape/Battery Remaining
The tape remaining and
battery charge
level
can be displayed
during
recording.
Set
the
POWER
switch
to
CAMERA.
Press
DISPLAY
repeatedly
to
select
the
desired
display.
£VF
indications
Battery
Charge
Remaining:
FULL
Tape
Retnaining:
-)5i^-
(No tape)
i^rst
press
1
FULL
SP
REC
•
It
Will
take
several seconds
for
the
tape
remaining indicator to operate
after the
tape starts
moving.
Recording
the
Date and
Time
EMPTY
z-;;^
Second
press
J
Set
the
POWER
switch to CAMERA.
When placed in
Record
mode,
the
time
and date will
be
recorded on the
tape.
Press
DISPLAY
twice to change
the display
to
date
only.
Press
once
or twice more to
remove the
date/
time
display.
Note:
ppnly
the Date and/or Time Indications are recorded on
the Tape.
Display-Off
Mode
This feature allows you to
remove all Electronic
Viewfinder
Indications except Intelligent
Titler (see
page
34).
Before inserting a tape, press DISPLAY
and STOP
together
for
more than one second to remove the
indications except
time
and date'.
To
display
the Electronic Viewfinder Indications
again,
turn the
Palmcorder Power off and then on again.
*
To
remove the
time
and date, press
the
DISPLAY
button
repeatedly.
15
To Next Page
Loading...
