Panasonic Palmcorder PV-D427 - Page 25

Play
Back
your Recordings in your VCR
Playback
using the
PlayPak
©CUD®
Insert
SHSC
Cassette
Remove QISC Cassette
Remove the Battery
Compartment
lid
and insert the AA size
battery.
•
Make
sure polarities are aligned
properly.
•
When tape
loading
and
unloading time
becomes
longer than nomial,
battery
replace-
ment Is necessary.
1Turn the Tape Wheel on the
IVHSH
cassette in the direction of the
arrow to take up
any slack.
Slide the RELEASE button
in the
direction of the arrow to open the
PlayPak
door.
Insert the
IVHSW
cassette with
the
window facing up and to the
left.
Then, snap the lid shut.
•
Be sure the cassette
reel area
under
the
PlayPak is free to
turn while
loading.
•
Allow
the
Load
Detector
to
fully retract
before using the
PlayPak in your
standard
VHS VCR.
Slide the RELEASE button and wait
for the lid to open.
'
Hold the
PlayPak
securely in one
hand. Using your
finger,
reach
through
the hole in the
bottom
of the PlayPak
Adaptor and push the tape out the top.
25