Before Use
• More vertical bars indicates stronger brightness
or color saturation.
To Increase the Brightness of the Entire LCD
Monitor
Press the [POWER LCD[ Button.
When you press [POWER LCD[ Button, the LCD
monitor becomes about twice as bright as usual.
• The Menu corresponding to the Mode
selected by using the Mode Dial i139 is
displayed.
• The [POWER LCD] Lamp lights up.
• When turning the power on while using AC
Adaptor, [POWER LCD] function is
automatically effective.
TO Resume Normal Brightness
Press the [POWER LCD] Button again.
TO Change the Picture Quality of the LCD
Monitor (PV-GS200 only)
Set the [LCD All on the [LCD/EVF[ Sub-Menu to
[ON] or [OFF].
[ONE: The screen image becomes clear and
vivid. (The effect varies according to the
recording scene.)
• When Power LCD Lamp lights up, [LCD AIEis
automatically set to [ON]. You can not change
this setting. (PV-GS200 only)
• These adjustments do not affect the recorded
images.
• For other notes concerning this item, see -,_t-.
Using the Menu Screen
To facilitate the selection of a desired function or
setup, this Camcorder displays various function
setups on Menus.
• When operating the menu with the Viewfinder,
set [LCD/EVF] >> [EVF ON/AUTO) >> [ON] or
rotate the LCD monitor by 180°.
1 Press the [MENU] Button i_4'.
2 Press the [I 1/11]Button to select a desired
Sub-Menu.
• Press the [I I/ll I Button to display the
highlighted item.
3 Press the [1_1_] Button to display the
selected Sub-Menu.
4 Press the [I I/I] Button to select the item.
5 Press the [1_1_] Button to display the
selected item,
6 Press the [I I/M] Button to select the desired
mode and press [ENTER] Button to
determine the setting.
• While a Menu is displayed, you cannot record or
play back. Menus can be displayed during
playback but not during recording. The above
operations can be done using the [MENU]
Button, [A, 4, _, Y] Buttons and [ENTER[
Button on the Remote Controller. (-t4-)
TO Return to the Previous Screen
Press the [<41] Button.
TO Exit the Menu Screen
Press the [MENU] Button again.
About the Menu Mode Setting
The setting selected on the Menu will be retained
even when the Camcorder is turned off. (The
setups of [EFFECT2] (-39-) are not retained.)
However, if the Battery or AC Adaptor is
disconnected before turning off the Camcorder,
the selected setup may not be retained.
• Menu operation flow is shown in this text by >>.
• File Selection in the Picture/MPEG4
Playback Mode (MPEG4 Playback
Mode on PV-GS200 Model only)
A File Selection Operation may be necessary
during Menu Operations. In this case, carry out
the following procedure.
1 Press the [IIIIII<<IIIH_] Button and select
a file.
• The selected file is marked by a frame.
p_OTIJRE
t,_25 _00.00_2
-21-
To Next Page
Loading...
