Recording Mode
31
4/4 NEXT
To Check the Recording
You can play back the last few seconds of the
recorded scene in the Recording Pause Mode.
• Set to Tape Recording Mode.
1 Press the Joystick Control to display the
One-Touch Navigation icon on the lower
right of the screen.
2 Move the Joystick Control [▼] until the
page with [ ] indication is displayed.
[One-Touch Navigation icon]
3 Move the Joystick Control [◄] to select
[ ].
• The [RECORDING CHECK STARTED] and
the [
] indication is displayed. After checking,
the Camcorder resumes the Recording Pause
Mode.
Finding the End of Recording
( Blank Search Function)
• Approximately 1 second before the last
recorded scene, the Camcorder switches to the
Recording Pause Mode or the Still Playback
Mode.
• If there is no blank left on the Cassette, the
Camcorder stops at the end of the tape.
SP 3h59m59s29f
R 2:00
12:34:56AM
JAN 2 2006 100
To Cancel the Blank Search Function
Before Completion
Move the Joystick Control [▼] to select [ ].
4/4 NEXT
[One-Touch Navigation icon]
3 Move the Joystick Control [►] to select
[ ].
• A confirmation message appears.
4 Move the Joystick Control [▲] or [▼]
to select [YES] and press the Joystick
Control.
YES
NO
SETUP ENTER EXIT
PERFORM BLANK SEARCH?
•
The [ ] indication and the One-Touch
Navigation icon appears during the Blank
Search
.
The Blank Search Function aids you in locating the
end of the recording on the Cassette quickly (unused
part of the tape).
• Set to Tape Recording/Playback Mode.
1 Press the Joystick Control to display the
One-Touch Navigation icon on the lower
right of the screen.
2 Move the Joystick Control [▼] until the
page with [ ] indication is displayed.
Recording a Still Picture on a Tape
(PV-GS29 Only)
Still pictures can be recorded on a tape.
• Set to Tape Recording Mode.
1 Press the [PHOTO SHOT] Button in the
Recording Pause mode.
• The Camcorder records a still picture for about
7 seconds and then switches back to the
recording pause mode.
• If you set [
ADVANCED] >> [ SHTR EFFECT]
>> [ON], you can add an image and a sound effect
for releasing the shutter.
• Photoshot recording results in slightly inferior
image quality.
Continuous photoshot
If you set [ ADVANCED] >> [ SHTR EFFECT]
>> [ON] and keep the [PHOTO SHOT] Button
pressed, the Camcorder will continuously record
still pictures in approx. 0.7 seconds intervals until
the button is released.
• The screen blinks and, at the same time, a
shutter clicking sound is recorded.
To Next Page
Loading...
