Panasonic Palmcorder PV-S64 - Loading and Replacing the Clock Battery

The date and time is calculated, including leap
year, up to Dec. 31,2089. This function
operates on a miniature battery (supplied) even
when the Palmcorder is OFF.
1
2
3
i How to remove the Battery.
®
*_ _ Bend the lock tab outward.
Removethe battery.
REPLACE BATTERY WITH PANASONIC PART
NO. VSBW0004 (CR2025) ONLY. USE OF
ANOTHER BATTERY MAY PRESENT A RISK
OF FIRE OR EXPLOSION. CAUTION-BATTERY
MAY EXPLODE IF MISTREATED. DISPOSE OF
USED BATTERY PROMPTLY. KEEP AWAY
FROM CHILDREN. DO NOT RECHARGE,
DISASSEMBLE OR DISPOSE OF IN FIRE.
1
While pinching the stopper tabs, pull
the tray out of the Battery Compartment.
2
Insert the battery (supplied) into the
Battery tray with the ¢ mark facing down.
• Do not reverse the polarity.
3
Replace the Battery tray so that the small
triangle marks meet.
Note:
• Makesure your Palmcorder is off when
replacing the battery.
• Keep the Battery out of the reach of
children since swallowing it may be
harmful.
• When the Battery is installed improperly,
is discharged, or is missing, the words
"CLOCK BATTERY" appears on the EVF
• Battery life is approximately 5 years.
13