Top ViewS-- -.
RESET DISPLAY
_APE REMAINING_
EVF Indications
Fifth
press
First
I_]_ press
DISPLAY
_2:_ /_2:_
Fourth t I SecOnd
press press
I
The rape and Time Counter displays can
be selected to track your current position, or
find a desired tape location.
Press the DISPLAY button repeatedly to
select the desired display.
Tape
Counter:
A reading is displayed for
any position on the tape.
Press the RESET button
to reset display to
"OOO0".
Memory
Counter:
The Palmcorder will stop
during Rewind, Fast
Forward, Video Dubbing,
Audio Dubbing and A/V
Dubbing whenever it
reaches the point where
the Tape Counter was
previously set to
"M0000".
Lap Time
Counter:
The elapsed time during a
recording is displayed.
Press the RESET button
to reset the display to
O:OOiO0.
Tape
Remaining:
Shows the time remaining
on the tape in 1 minute
segments, during playback
or recording.
• Make sure the TAPE REMAINING switch
is set to the proper position (T-20, T-30 or
T-40 see page 11.) so that the tape
remaining time will function properly.
25
To Next Page
Loading...
