Use Manual Focus when recording ...
• a subject through glass.
• a scene where the subject is far from the
Palmcorder and there are objects in the
foreground.
• a subject with distincthorizontal stripes.
• a subject not centered in the Viewfinder.
• subjectswith shiny surfaces.
• an obliquely angled subject.
• a bright, flat subject such as a white wall.
• in low lightsituations.
• a scene with fast motions, like a golf swing.
• Re-focusing may be required
when your Palmcorder is aimed at a new
scene.
4
I
The Palmcorder will automatically bring the
subject intofocus even during zooming.
Press FOCUS A/M if necessary, so that
the letters "MF" do not appear inthe EVF.
!_. NORMAL
Set the AUTO LOCK switch to NORMAL
FOCUS
A/M
2 6
Press FOCUS so that _
"MF" (Manual Focus)
appears inthe EVF.
Press and hold the "T" side of the
POWER ZOOM switch until the subject to
be recorded is at maximum zoom-in.
Turn the oo(FAR)/NEAR dial until the
picture is in focus.
• It may be necessary to back away from
the subject to focus the image properly.
Press the "W" side of the POWER ZOOM
switch to frame the pictureas desired.
Auto Focus will function down
to 1/2 inch (12.7mm) in front of
the lens.
Press the "W" side of the POWER
ZOOM switch to the wide angle position.
Then, bring the Palmcorder as close to
the subject as necessary.
27
To Next Page
Loading...
