Use for continuous color balance
in both indoor and outdoor
lighting situations.
When the AUTO LOCK switch is to AUTO
LOCK, or when there is no EVF indication,
AUTO White Balance is selected.
1 2
LIGHT_
Use under the conditions described below.
"/- NORMAL
1
Set the AUTO LOCK switch to NORMAL.
WB
12
Press WHITE BALANCE
repeatedly to select one
of the following settings.
Select" -_0_-" OUTDOOR
when recording outdoor
scenes from indoors, or
outdoors with an amber
filter.
Select "_C>" INDOOR
when recording indoor
scenes from outside, or
indoors with a blue filter.
__EVFIndicationS)
I "
I "
J
• White Balance is affected by Color
Temperature. See the chart on page 41.
!
EVF Indications
.-_ normal (no display)
i_ First press
(low)
i_ Second press
_r (medium)
Third press
(,high)
Fourth press
Select one of these positions so that the subject
can be seen clearly.
28
Use when recording a subject that
is darker than the surrounding
scene, in a shadowed area or
when the light source is in back of
your subject.
Make sure the AUTO LOCK switch is set to
NORMAL.
BACK LIGHT
Press BACKLIGHT to obtain the desired
position while recording.
BACK LIGHT
Press until there is no display in the EVF
when lighting conditions return to normal.
To Next Page
Loading...
