Panasonic Palmcorder PV-S64 - Page 31

Before you begin...
• Set the POWER switch to CAMEHA.
4
2 3,5
This feature allows you to
increase the magnification of
the Power Zoom.
_ NORMAL
1
_ _-_o
Set the AUTO LOCK switch to NORMAL.
DIGITAL
SELECT _---
(PV-S64)
Slide the DIGITAL SELECT switch up.
D.ZOOM
3 o
Press DIGITAL ZOOM
once to select D.ZOOM 1 for partial
increase (20X max.) or twice toselect
D.ZOOM 2 (120X max.) for even greater
increase.
Because the image is enlarged digitally, the
3icture may become distorted when the
higher magnification levels are used.
Press and hold the "T" side of the
POWER ZOOM switch.
Digital Zoom engages when the Power
Zoom reaches its maximum position of x12.
• The zoom level is displayed in the EVF.
• Press the "r" or "W" side of the POWER
ZOOM switch to control the digital zoom
level.
• When the level fallsbelowx12, the normal
zooming function will resume
D.ZOOM
5
Press DIGITAL ZOOM
until no indication appears in the EVF to
turn the Digital Zoom feature off.
(Refer to page 26.)
31