1
2 3 4
Press MODE Button
Wipe 1 _ Wipe 2 _ Wipe 3 _ Mix
34
This feature makes it possible to
replace a current recording
scene by a memorized scene.
NORMAL
1
y _o
Set the AUTO LOCK switch to NORMAL.
DiGiTAL
SELECT _--
12 Re;
L_____
Slide the DIGITAL SELECT switch down.
3
( )
MEMORY
Press MEMORY in Record/Pause mode
to memorize the desired scene.
• The memorized scene is displayed in the
EVF for one second and "MEM." is
displayed while scene is memorized.
• MEMORY button does not function while
recording or when a scene from memory
is being displayed.
4 c3
MODE
Press MODE repeatedly to select the
desired effect for Wipe or Mix.
5 CD
START
Press START to start the effect.
The memorized scene gradually replaces
the current recording. IfSTART is pressed
one more time, current recording will
gradually replace the memorized scene.
• While WIPE or MIX is in progress, you can
hold the WIPE or MIX by pressing the
START.
Press START again to continue WIPE or
MIX.
Note:
• The memorized scene will be cleared
when Palmcorder is turned off.
To Next Page
Loading...
