Before you begin...
• Connect the Synchro Edit Cord (optional) as
shown below. If the recording unit has no
synchro edit jack, use operations on page 35.
Connection
VHF Connecting
Cable (not supplied)
Recording:
VCR or
Camcorder
Audio/Video Cable
(supplied)
Synchro Edit
Cord (optional)
_udio
The Synchro Edit feature simultaneously
releases the Pause mode on both units, so
copying is fast and easy.
1
Follow steps 1 to 4 on page 35.
2
Press PAUSE on the recording unit
to release the Pause mode on both units
and start copying the tape.
3
Press PAUSE again when copying is
complete to put both units in Play/Pause
mode.
STOP
4
Press STOP on both units.
• For more information about monitoring
the copying process, see page 35.
36
DC Input Synchro Edit/
Connector
Remote Jack
DC Power
Cable
DC Output
Connector
To Next Page
Loading...
