72
Advanced Features
Timer Controlled Communications
You can send a document to one or multiple stations at any preset time within the next 24 hours. Up to 10
built-in timers can be set for deferred transmission and deferred polling.
NOTE
1. If you enter a wrong number in Step 4, press then re-enter the right number.
2. To change or cancel the Deferred Communication settings, see page 85 and 87.
3. When you reserve a deferred transmission without storing a document into memory, the
following message will be shown on the display after pressing in the last step.
DEF DIRECT XMT RSV’D
<01>(Station name)
General Description
Deferred Transmission
1
Set document(s) face down.
ENTER STATION(S)
THEN PRESS START 00%
2
DEFERRED COMM. (1-2)
ENTER NO. OR
∨ ∧
3
DEFERRED XMT
START TIME
❚
:
4
Enter the start time from the keypad.
(Use a 4-digit, 24-hour clock)
Ex: (11:30 p.m.) and
ENTER STATION(S)
THEN PRESS START
5
Dial by any combination of the following methods:
• One-Touch Dialling
• Abbreviated Dialling
• Manual Number Dialling, press after each
station is entered
(Up to 12 stations)
• Directory Search Dialling, press after each
station is entered
(For details, see pages 48 to 50.)
Ex:
<01>(Station name)
5551234
6
to store documents into the memory.
* STORE * NO.002
PAGES=001 05%
* STORE * COMPLETED
TOTAL PAGES=005 30%
1
1
2
3 3
0
SET
SET
SET
CLEAR
START
To Next Page
Loading...
