96
Fax Cover Sheet
A Fax Cover Sheet can be automatically attached to your transmit document(s) that shows the recipient's
name, originator's name and the number of pages attached.
To attach a Fax Cover Sheet to a transmission, follow the procedure below.
NOTE
1. To change the preset Fax Cover Sheet Setting, change the setting of Fax Parameter No. 56.
(see page 39).
2. This function is available for memory or direct transmission modes.
3. The Fax Cover Sheet is not counted in the number of pages column of the journals.
General Description
To use the Fax Cover Sheet
1
Set document(s) face down.
ENTER STATION(S)
THEN PRESS START 00%
2
SELECT MODE (1-9)
ENTER NO. OR
∨ ∧
3
COVER SHEET=OFF
1:OFF 2:ON
4
for “OFF” (Cover Sheet is not attached)
or
for “ON” (Cover Sheet is attached)
COVER SHEET=OFF
1:OFF 2:ON
or
COVER SHEET=ON
1:OFF 2:ON
5
ENTER STATION(S)
THEN PRESS START 00%
6
Dial the station(s) you wish to send the documents to.
Ex:
Page 1 Page 2 Page 1
Header P.01 Header P.02
Total P.02
Page 2
Fax
Cover
Sheet
Received as:Transmitted as:
8
3
1
2
To Next Page
Loading...
