Panasonic Panafax UF-7000 - Changing or Erasing the Settings of the One-Touch;Abbreviated Dialing Numbers

104
Setting Your Machine
Programming Auto Dialer
 Changing or Erasing the Settings of the One-Touch/Abbreviated Dialing Numbers
NOTE
1. If you need to dial a prefix to get an outside line, enter it first and then press .
A hyphen "-" is displayed for pause.
2. Use to enter a space between the numbers to make it easier to read.
3. If you have to change any of the One-Touch/ABBR. No., enter a new number, email address
or station name after pressing key in each Steps.
4. To correct a mistake, use or to move the cursor to the right side of the incorrect
number; press then re-enter the correct number.
[001] SALES DEPT
 9-555 2345
[001] SALES DEPT
 9-555 2345
Press , then enter a new
telephone number(s) or email
address, then press .
CLEAR
SET
1:ONE-TOUCH
2:ABBR NO.
To change
To erase
+
1 2
4a
4b
Ex:
2
(When Fax Parameter No. 119 is set to "1:One-Touch", see page 112.)
PAUSE
MONITOR
CLEAR
CLEAR