Panasonic Panafax UF-7000 - Information Code

113
Setting Your Machine
121 AUTO RESET TIMER 1 OFF Selecting whether the contorol
2 30 sec. panel reset time.
*3 1 min.
4 2 min.
5 3 min.
6 4 min.
122 DIAL PREFIX (----) Setting the Dial Prefix number (Max. 4-digits). When
the machine detects a 10-digit telephone number
(excluding any characters; such as "-") being dialed, it
will automatically append the preset Dial Prefix
number.
When the telephone number is Less or More than 10-
digits in length, the Dial Prefix number is not
appended.
140 LAN RELAY XMT
REQUEST
*1 Invalid Selecting whether the machine performs LAN Relay
XMT Request.
2 Valid
142 RELAY XMT
(A.K.A. LAN RELAY
STATION ON UF-770I)
1 Invalid Selecting whether the machine accepts and performs
G3 relayed transmission. (Relay Station Functions)
*2 Valid
143 RELAY XMT REPORT 1 Off Setting how the COMM. Journal for relayed
transmission is sent to the originator.
Off :Don’t send.
Always :Always send.
Inc. Only : Send only if communication has failed.
*2 Always
3 Inc. Only
144 EMAIL CHARACTER
SET
1 Japanese Selecting the Character Set when receiving or sending
email text.
*2 English
145 SENDER SELECTION *1 Invalid Selecting a pre-programmed sender’s name and email
address before each transmission.
2 Valid
146 POP TIMER ---- 0 to 60 min. Setting the time interval for the machine to check for
email on the POP Server.
(0 = Does not check the POP Server for email.)
*3
147 AUTO POP RCV 1 Invalid Selecting whether the machine automatically
downloads an email from the POP Server.
*2 Valid
148 DELETE POP RCV
EMAIL
1 Invalid Selecting whether the email will be deleted
automatically after retrieval from the POP Server.
*2 Valid
149 DELETE POP ERROR
EMAIL
*1 Invalid Selecting whether to delete the email that includes an
incompatible file attachment from the POP Server.
2 Valid
150 IFAX RETURN RECEIPT 1 Invalid Selecting whether to send a return receipt when
receiving from another Panasonic Internet Fax.
*2 Valid
151 EMAIL HEADER
FORMAT
1 All Selecting the header information to print when an
email is received. (Normally used for Troubleshooting.
It shows the path of the email transmission before
arriving at your machine.)
*2 Subject/
From/To
3 Off
152 SUB-ADDRESS
ROUTING
*1 Invalid Selecting whether to automatically route a received
email using ITU-T sub-address.
2 Valid
153 TSI ROUTING *1 Invalid Selecting whether to route a received fax to an email
address preprogrammed in Phone Book using the
originating fax’s Numeric ID (TSI frame information).
2 Valid
No. Parameter
Setting
Number
Setting Comments