48
When SEARCH/OPEN/CLOSE is pressed during
single screen.
When a channel button is pressed during channel
search.
Sound from the left screen is
output from the speakers on the
Projection Display set.
Channel search displays each channel, in order, as a paused image. Channels are dis played from the left top
to the right bottom in order. When it reaches the right bottom, the next channel is displayed at the left top,
overwriting the previously dis played channel.
Notes:
• To end channel search, press
SEARCH/OPEN/CLOSE.
• While using the PIP feature, Channel
search is not available.
• Channel search feature works with
analog channels only. ATSC channel
search is not possible.
• When CARD and HDMI input screen is
displayed, no search is possible.
• Channel search feature works only if
signal is from Antenna (A).
SEARCH
OPEN/CLOSE
!
Example: Select channel 6
(RGB input)
Channel up and down buttons:
When ▲ or ▼ is pressed, the next channel up or down is dis played in
single screen.
Number keys:
Example: When 6 is pressed, channel 6 is dis played in single screen.
Example 1
Example 2
Searching for the desired channel (Channel search)
To Next Page
Loading...
