Panasonic PT-AE4000E - Page 28

PICTURE menu
28 -
E
NGLISH
Press ▲ ▼3. to select your desired colour and press
the ENTER button.
RED
GREEN
BLUE
CYAN
MAGENTA
YELLOW
The sample box and the menu items are displayed
on the screen.
ENTER
DEFAULT
RETURN
SELECT
RED
-
+
-
+
-
+
COLOUR
TINT
BRIGHTNESS
0
0
0
Sampled colour
Press ▲ ▼ to select a menu item and the ◄ ► to 4.
adjust each item level.
The result box is displayed on the right of the sample
box and shows the adjusted colour.
Both the sampled and adjusted colour indicated in
the RGBCMY mode are shown only as a guide.
ENTER
DEFAULT
RETURN
SELECT
RED
-
+
-
+
-
+
COLOUR
TINT
BRIGHTNESS
+10
+10
+10
Adjusted colour
Sampled colour
COLOUR
Adjust the vividness of the colour.
Setting range: −30 to +30
TINT
Adjust the colour tone.
Setting range: −30 to +30
BRIGHTNESS
Adjust the brightness of the colour.
Setting range: −20 to +20
Press the 5. ENTER button to store the adjusted
result.
“ PROCESSING” is displayed for a few seconds and
the result is stored in LOG.
You can store up to 6 different colour adjusted
images under LOG for each PICTURE MODE
setting.
Press the 6. MENU or RETURN button to return to
the previous menu.
Repeat the steps above to store more adjustments.
Managing the stored logs which are
created through the CURSOR mode.
You can edit or delete the stored logs of the
selected PICTURE MODE.
Press ▲ ▼ to select 1. LOG and press the ENTER
button.
The LOG menu is displayed.
POINT1
POINT2
POINT3
POINT4
POINT5
POINT6
POINT7
POINT8
ALL DELETE
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
ADJUSTMENT MODE
PICTURE MODE
: CURSOR
: NORMAL
COLOUR TINT
BRIGHTNESS
Sampled colour Adjusted colour
Press ▲ ▼ to select the required log from 1 - 8 or 2.
ALL DELETE, and press the ENTER button.
Select CHANGE to edit the log.
The CURSOR mode is displayed and you can
readjust the colour.
Select DELETE to delete the log.
The conrmation screen will be displayed. Select
OK to delete.
When you select ALL DELETE, the “DELETE ALL
LOG.” screen is displayed. Select OK to delete all
logs. The PROFILE setting will be set to NORMAL.
Managing the stored logs which are
created through the RGBCMY mode.
Sampled colour Adjusted colour
RED
GREEN
BLUE
CYAN
MAGENTA
YELLOW
ALL DELETE
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
ADJUSTMENT MODE
PICTURE MODE
: RGBCMY
: NORMAL
COLOUR TINT
BRIGHTNESS
Press ▲ ▼ to select 1. LOG and press the ENTER
button.
The LOG menu is displayed.
Select the required log from 6 different colours 2.
(R, G, B, C, M, Y) or ALL DELETE, and press the
ENTER button.
Select CHANGE to edit the log.
The RGBCMY mode is displayed and you can
readjust the colour.
Select DELETE to delete the log.
The conrmation screen will be displayed. Select
OK to delete.
When you select ALL DELETE, the “DELETE ALL
LOG.” screen is displayed. Select OK to delete all
logs. The PROFILE setting will be set to NORMAL.