Panasonic PT-AE4000U - Page 26

PICTURE menu
26 -
E
NGLISH
Initialize the 4. GAMMA settings in the ADVANCED
mode.
Press ▲ ▼ to select 1) INITIALIZE in the GAMMA
ADJUSTMENT menu, and press the ENTER button.
ADJUSTMENT MODE
GAMMA HIGH
GAMMA MID
GAMMA LOW
POINT
Y ADJUST
R ADJUST
G ADJUST
B ADJUST
INITIALIZE
ADVANCED
5
GAMMA ADJUSTMENT
ENTER
RETURN
SELECT
The conrmation screen will be displayed for the 2)
GAMMA initialization.
GAMMA ADJUSTMENT
OK CANCEL
INITIALIZE GAMMA ADJUSTMENT.
Press ◄ ► to select 3) OK and press the ENTER
button.
Your GAMMA settings in the ADVANCED mode will
go back to the factory default setting.
NOTE:
It is not available to initialize in the • SIMPLE mode.
Setting the GAMMA with the SIMPLE
Q
mode
In the 1. GAMMA ADJUSTMENT menu, press ◄ ►
to select SIMPLE in ADJUSTMENT MODE.
0
0
0
ADJUSTMENT MODE
GAMMA HIGH
GAMMA MID
GAMMA LOW
POINT
Y ADJUST
R ADJUST
GADJUST
SIMPLE
GAMMA ADJUSTMENT
You can adjust linear intensity at 3 levels (high, 2.
mid, low).
Press ▲ ▼ to select your required GAMMA
levels.
Levels Default setting
GAMMA HIGH 0
GAMMA MID 0
GAMMA LOW 0
Setting range: −8 to +8
Press ◄ ► to increase/decrease 1 point.
-
+
GAMMA HIGH
0
-
+
GAMMA MID
0
-
+
GAMMA LOW
0
J
CONTRAST
You can adjust the amount of contrast of individual
RGB colors. Press ◄ ► to increase/decrease
1 point.
RGB Default setting
CONTRAST R 0
CONTRAST G 0
CONTRAST B 0
Setting range: −32 to +32
J
BRIGHTNESS
You can adjust the brightness of individual RGB
colors. Press ◄ ► to increase/decrease 1 point.
RGB Default setting
BRIGHTNESS R 0
BRIGHTNESS G 0
BRIGHTNESS B 0
Setting range: −16 to +16
J
NR (Noise Reduction)
You can adjust the automatic noise reduction
system level. Press ◄ ► to change the level.
Setting range: 0 to +3
J
MPEG NR
You can adjust the automatic noise reduction
system level for MPEG format images. The
system minimise block noise and mosquito noise
to eliminate jagged edges, and provides an overall
smoother image. Press ◄ ► to change the level.
Setting range: 0 to +3
NOTE:
MPEG NR • system is not available with COMPUTER/
HDMI (VGA60) signals.
J
FRAME CREATION
You can activate the rendering system for fast
motion frames with fewer afterimage. Press ◄ ►
to select the required option.
OFF Deactivate
MODE1 Setting for a cinema image
MODE2 Setting for a moving image
MODE3 Setting for a fast moving image
NOTE:
With some of the images, it might be difcult to see a •
difference in result.
The image might look delayed with the • MODE2/
MODE3 setting. When the result does not meet your
requirement, select MODE1 or deactivate the system.