Using Web Browser (continued)
Authentication set up page
The POP/SMTP server is set on this page when POP/SMTP authentication is required for mail transmissions.
Click [Detailed set up], then [Authentication set up] to display the Authentication server setup page.
Select the authentication method specied by
your Internet service provider.
Set this if SMTP authentication has been
selected.
POP server name eld
Available input characters:
Alphanumeric characters (A - Z, a - z, 0 - 9),
hyphen (-), period (.)
POP/SMTP server user name eld
POP/SMTP server password eld
Enter the port number for the SMTP server
(normally “25”).
Enter the port number for the POP server
(normally “110”).
Button to update settings
To Next Page
Loading...
