Chapter 4 Settings — [PICTURE] menu
82 - ENGLISH
2) Display the [PICTURE] menu.
f Refer to “[PICTURE] menu” (x page 76).
3) Press as to select [PICTURE MODE].
4) Press qw to set [NATURAL].
5) Press as to select [COLOR].
6) Press the <DEFAULT> button on the remote control to set the factory default setting.
7) Follow Steps 5) - 6) to set [TINT], [COLOR TEMPERATURE], [WHITE GAIN], [GAMMA], and [SYSTEM
DAYLIGHT VIEW] to the factory default settings.
Note
f sRGB is available for RGB signal input only.
To Next Page
Loading...
