(7) Unscrew the 2 screws and remove the lamp 1 cooling unit.
(8) Unscrew each of 1 screw and remove the 2 thermofuse holders.
(9) Unscrew the 1 screws and remove the color wheel cover.
(10) Unscrew the 2 screws and remove the optical holding metal
fixure.
(11) Unscrew the 4 screws and separate the analysis block and
synthesis block.
Note:
·
Work carefully because the rod is installed in the
synthesis block.
36
PT-DZ6710U / PT-DZ6710E / PT-DZ6700U / PT-DZ6700E / PT-DW6300US / PT-DW6300ES / PT-D6000US / PT-D6000ES
To Next Page
Loading...
