Panasonic PT-FRQ50 - Page 124

Chapter 4 Settings — [PROJECTOR SETUP] menu
124 - ENGLISH
1) Press
as
to select [HDMI CEC].
2) Press
qw
to select [ON].
3) Press the <ENTER> button.
f
The
[HDMI CEC]
screen is displayed.
4) Press
as
to select [HDMI 1] or [HDMI 2].
f
Select the input corresponding to the CEC-compatible device you want to operate.
f
Proceed to Step
6)
when the device to operate is displayed.
5) Press
qw
to switch the item.
f
The devices will switch when multiple CEC-compatible devices are connected to one input.
f
Select the device to operate.
6) Press
as
to select [HDMI-CEC OPERATION].
7) Press the <ENTER> button.
f
The HDMI-CEC operation screen is displayed.
8) Select the item displayed on the HDMI-CEC operation screen to operate the device.
f
Refer to the “Using HDMI-CEC function” (
x
page 182) for the operation details.
Note
f
If no CEC-compatible device is connected to <HDMI IN 1> or <HDMI IN 2> terminal, there is no device displayed at [HDMI 1] or [HDMI 2]
and [----] is displayed.
f
To exit the HDMI-CEC operation screen, press the <RETURN> button or <MENU> button.
Changing the menu code
The menu code that calls up the operation menu of the CEC-compatible device varies depending on the device
manufacturer. If you cannot call up the operation menu of a CEC-compatible device from the HDMI-CEC operation
screen, change the menu code setting.
1) Press
as
to select [HDMI CEC].
2) Press
qw
to select [ON].
3) Press the <ENTER> button.
f
The
[HDMI CEC]
screen is displayed.
4) Press
as
to select [MENU CODE].
5) Press
qw
to switch the item.
f
The items will switch each time you press the button.
f
Select the menu code from [1] to [6].
Setting the link control
Make settings for the link control between the projector and CEC-compatible devices.
[PROJECTOR -> DEVICE]
Set the link control from the projector to the CEC-compatible device.
1) Press
as
to select [HDMI CEC].
2) Press
qw
to select [ON].
3) Press the <ENTER> button.
f
The
[HDMI CEC]
screen is displayed.
4) Press
as
to select [PROJECTOR
->
DEVICE].
5) Press
qw
to switch the item.
f
The items will switch each time you press the button.