Panasonic PT-FRQ50 - [TEST PATTERN] Menu; [Test Pattern]

Chapter 4 Settings — [TEST PATTERN] menu
128 - ENGLISH
[TEST PATTERN] menu
On the menu screen, select [TEST PATTERN] from the main menu.
Refer to “Navigating through the menu” (
x
page 61) for the operation of the menu screen.
[TEST PATTERN]
Display the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reected in test patterns. Make sure to display the input
signal before performing various adjustments.
1) Press
qw
to switch the [TEST PATTERN] item.
f
The items will switch each time you press the button.
Menu screen + All white
Displays a test pattern with the menu screen. Select a desired test pattern.
Menu screen + All black
Menu screen + Window
Menu screen + Window
(inversion)
Menu screen + Color bar
(vertical)
Menu screen + Color bar
(horizontal)
Menu screen + 16:9/4:3
aspect frame
Menu screen + Focus
Menu screen + Input screen
Displays the menu screen and input signal.
Internal test patterns are not displayed.
Note
f
Press the <ON SCREEN> button on the remote control while the test pattern is displayed to hide the menu screen.
Changing color of the focus test pattern
The color can be changed when the “Menu screen + Focus” test pattern is displayed.
1) Press
qw
to select the “Menu screen + Focus” test pattern.
2) Press the <ENTER> button.
f
The
[TEST PATTERN COLOR]
screen is displayed.
3) Press
as
to select a color, and press the <ENTER> button.
f
The color of the focus test pattern will be changed to the selected color.
Note
f
The [TEST PATTERN COLOR] setting returns to [WHITE] when the projector is switched o󰀨.
f
Colors of the test patterns other than focus test patterns cannot be changed.