Chapter 4 Settings — Menu navigation
ENGLISH - 65
Sub-menu item Factory default Page
[LOAD ALL USER DATA] ― 123
[HDMI CEC] [ON] 123
[INITIALIZE] ― 125
[FIRMWARE UPDATE] ― 127
[SERVICE PASSWORD] ― 127
[TEST PATTERN]
Details (
x
page 128)
[SIGNAL LIST]
Details (
x
page 129)
[SECURITY]
Sub-menu item Factory default Page
[SECURITY PASSWORD] [OFF] 132
[SECURITY PASSWORD CHANGE] ― 132
[CONTROL DEVICE SETUP] ― 133
[CONTROL DEVICE PASSWORD CHANGE] ― 134
[NETWORK]
Sub-menu item Factory default Page
[ETHERNET TYPE] [LAN] 135
[DIGITAL LINK] ― 135
[WIRED LAN] ― 137
[WIRELESS LAN]
*1
[ENABLE] 137
[PROJECTOR NAME] ― 138
[NETWORK STATUS] ― 138
[ADMINISTRATOR ACCOUNT] ― 139
[NETWORK SECURITY] ― 141
[NETWORK CONTROL] ― 142
[PJLink] ― 142
[Art-Net] ― 144
*1 [WIRELESS LAN] cannot be set if the optional Wireless Module (Model No.: AJ-WM50 Series) is not attached to the <USB (DC OUT)> terminal.
Note
f
Some items may not be adjusted or used for certain signal formats to be input to the projector.
When the items cannot be adjusted or used, the items in the menu screen are shown in black characters, and they cannot be adjusted or
set.
f
Sub-menu items and factory default settings vary depending on the selected input terminal.
To Next Page
Loading...
