Panasonic PT-FRZ50 - Page 43

Chapter 3 Basic Operations — Switching on/o󰀨 the projector
ENGLISH - 43
16:10
4/6
SCREEN POSITION
Set as necessary for the screen in use.
INITIAL SETTING
SET
CHANGE
SCREEN FORMAT
ENTER
2) Press
as
to select [SCREEN POSITION].
16:9
0
4/6
SCREEN POSITION
Set as necessary for the screen in use.
INITIAL SETTING
SET
CHANGE
SCREEN FORMAT
ENTER
MENU SELECT
3) Press
qw
to adjust.
4) Press the <ENTER> button to proceed to the initial setting.
Initial setting (time zone)
Set [TIME ZONE] in accordance with the country or region where you use the projector.
After completed the initial setting, you can change the setting from the [PROJECTOR SETUP] menu
→
[DATE
AND TIME]. The current settings are displayed in [LOCAL DATE] and [LOCAL TIME].
1) Press
qw
to switch the setting.
+09:00
5/6
20XX/01/01
12：34：56
LOCAL DATE
LOCAL TIME
Please set up a time zone according to
the area of your country or region.
INITIAL SETTING
SET
CHANGE
TIME ZONE
ENTER
2) Press the <ENTER> button to proceed to the initial setting.
Note
f
In the factory default setting, the time zone of the projector is set to +09:00 (Japan and Korea Standard Time). Change the setting of the
[PROJECTOR SETUP] menu
→
[DATE AND TIME]
→
[TIME ZONE] to the time zone of the region where you use the projector.
Initial setting (date and time)
Set the local date and time. After completed the initial setting, you can change the setting from the [PROJECTOR
SETUP] menu
→
[DATE AND TIME].