Panasonic PT-FRZ50 - Page 72

Chapter 4 Settings — [POSITION] menu
72 - ENGLISH
Setting [KEYSTONE] or [CURVED CORRECTION]
1) Press
as
to select [SCREEN ADJUSTMENT].
2) Press
qw
to select [KEYSTONE] or [CURVED CORRECTION].
3) Press the <ENTER> button.
f
The
[KEYSTONE]
or
[CURVED CORRECTION]
screen is displayed.
4) Press
as
to select the item to adjust.
5) Press
qw
to adjust.
[KEYSTONE]
[LENS THROW RATIO]
Set the throw ratio.
Select the value close to the actual projection distance divided by projected image width here.
[VERTICAL KEYSTONE] [HORIZONTAL KEYSTONE]
[VERTICAL BALANCE] [HORIZONTAL BALANCE]
Adjust the setting according to the lens shift range in the vertical
direction.
Adjust the setting according to the lens shift range in the horizontal
direction.
[CURVED CORRECTION]
[LENS THROW RATIO]
Set the throw ratio.
Select the value close to the actual projection distance divided by projected image width here.
[VERTICAL KEYSTONE] [HORIZONTAL KEYSTONE]
[VERTICAL ARC] [HORIZONTAL ARC]
[VERTICAL BALANCE] [HORIZONTAL BALANCE]
[MAINTAIN ASPECT RATIO]
Select [ON] to correct while keeping the aspect ratio.