Panasonic PT-JW130FBE - Page 169

Chapter 5 Operations — Content Manager
ENGLISH - 169
r [Interrupt registration] screen
This is the screen displayed after selecting still image content to be used for interruption playback.
7
8
1
6
2
3
4
5
1 Interrupted still image content name
Enter the interrupted still image content name.
2 [Start]
Sets the time to start interruption playback.
3 [End]
Select the radio button, and set the time to end the interruption
playback.
4 [Duration]
Select the radio button, and set the time to start the interruption
playback.
5 Interrupted still image content being selected
Displays the selected still image content.
6 [Return] button
Click this to return to the [Interrupt list] screen.
7 Projector time
Displays the time of the connected projector.
8 [Save] button
Click this to conrm the settings, and register the interruption
schedule in the SD card.
r Procedure
1) Click .
f The [Interrupt registration] screen is displayed.
2) Click the [Select] button.
f The le selection screen is displayed.
3) Select still image content used for interruption playback (one file at a time), and click the [Open]
button.
f The [Interrupt registration] screen display is updated.