Panasonic PT-LB386 - Page 135

ENGLISH - 135
Dimensions
Width: 335 mm (13-3/16")
Height: 96 mm (3-25/32") (when adjustable foot shortened)
Depth: 252 mm (9-29/32")
Weight
PT-LW376, PT-LW336, PT-LB426,
PT-LB386, PT-LB356
Approx. 2.9 kg (6.39 lbs.) *
2
PT-LB306
Approx. 2.8 kg (6.17 lbs.) *
2
Noise level *
1
When set to [NORMAL] in [LAMP POWER] : 38 dB
When set to [ECO] in [LAMP POWER] : 35 dB
When set to [QUIET] in [LAMP POWER] : 30 dB
Operating
environ-
ment
Operating
environment
temperature *
3
5 °C (41 °F) to 40 °C (104 °F) (Elevation: below 1 400 m (4 593'))
5 °C (41 °F) to 35 °C (95 °F) (Elevation: 1 400 m (4 593') ~ 2 700 m (8 858'))
Operating
environment
humidity
20 % to 80 % (no condensation)
Remote
control
Power supply
DC 3 V (AAA/R03/LR03 battery x 2)
Operating range
Approx. 7 m (22'11-5/8") (when operated directly in front of receptor)
Weight
63 g (2.22 ozs.) (including batteries)
Dimensions
Width : 44 mm (1-23/32"), Length : 105 mm (4-1/8"), Height : 20.5 mm (13/16")
*1 Measurement, measuring conditions and method of notation all comply with ISO/IEC 21118:2020 international standards.
*2 This is an average value. It may di󰀨er depending on individual product.
*3 When [LAMP POWER] is set to [NORMAL] and the projector is operated at an elevation of 1 400 m (4 593') or less, if the ambient
temperature exceeds 35 °C (95 °F) , [LAMP POWER] will be switched to [ECO] automatically to protect the projector; When [LAMP
POWER] is set to [NORMAL] and the projector is operated at an elevation between 1 400 m (4 593') and 2 700 m (8 858'), if the ambient
temperature exceeds 30 °C (86 °F) , [LAMP POWER] will be switched to [ECO] automatically to protect the projector.
Note
f The part numbers of accessories and separately sold components are subject to change without notice.
r Connecting terminal
<COMPUTER 1 IN> terminal
1 (High-density D-sub 15 pin female)
RGB signal 0.7 V [p-p] 75 Ω
HD/SYNC TTL high impedance, automatic positive/negative polarity compatible
VD TTL high impedance, automatic positive/negative polarity compatible
(HD/SYNC and VD do not support 3 value SYNC.)
YP
B
P
R
signal Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
Y/C signal Y: 1.0 V [p-p] C: 0.286 V [p-p] 75 Ω S1 signal compatible
<COMPUTER 2 IN/1 OUT>
terminal
*1
1 (High-density D-sub 15 pin female)
RGB signal 0.7 V [p-p] 75 Ω
HD/SYNC TTL high impedance, automatic positive/negative polarity compatible
VD TTL high impedance, automatic positive/negative polarity compatible
(HD/SYNC and VD do not support 3 value SYNC.)
YP
B
P
R
signal Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<MONITOR OUT> terminal
*2
1 (High-density D-sub 15 pin female)
RGB signal 0.7 V [p-p] 75 Ω
HD/SYNC TTL high impedance, positive/negative polarity compatible
VD TTL high impedance, positive/negative polarity compatible
YP
B
P
R
signal Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<VIDEO IN> terminal
1 (Pin jack 1.0 V [p-p] 75 Ω)
<HDMI IN> terminal
*2
1 (HDMI 19 pin, HDCP and Deep color compatible)
Audio signal Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
<HDMI 1 IN>/<HDMI 2 IN>
terminal
*1
2 (HDMI 19 pin, HDCP and Deep color compatible)
Audio signal Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
<AUDIO IN 1> terminal
1 (M3 stereo mini jack, 0.5 V [rms], input impedance 22 kΩ and more)
<AUDIO IN 2> terminal
1 (Pin jack x 2 (L-R), 0.5 V [rms], input impedance 22 kΩ and more)
<VARIABLE AUDIO OUT>
terminal
1 (M3 stereo mini jack, stereo monitor output compatible,
0 V [rms] to 2.0 V [rms] variable, output impedance 2.2 kΩ and less)
<USB A (VIEWER/WIRELESS/
DC OUT)> terminal
*1
USB connector (type A x 1)
Memory Viewer / Wireless module (Model No.: AJ-WM50 / ET-WML100) compatible / power supply (DC
5 V, maximum 2 A)
<USB B > terminal
*2
USB connector (type B x 1), for service use
<SERIAL IN> terminal
1 (D-sub 9 pin, RS-232C compliant, for computer control use)
<LAN> terminal
*1
1 (for RJ-45 network connection, PJLink (Class 2) compatible, 10Base-T/100Base-TX)
*1 Only for PT-LW376, PT-LW336, PT-LB426, PT-LB386 and PT-LB356
*2 Only for PT-LB306
Chapter 7 Appendix - Specications