Panasonic PT-LB75VE - Frame Lock

POSITION menu
Settings
36 -
E
NGLISH
S4:3
J
When a standard signal *
1
is input, the input signal
will be sized down 75% and projected. S4:3 mode
is effective when projecting 4:3 image onto a 16:9
screen.
Input signal: XGA
z
Image: Panel: Screen:
7+528*+
J
The image will be projected without any size
adjustment.
Input signal: NTSC
z
Image: Panel:
A standard signal has an aspect ratio of 4:3 or 5:4.*1:
Note
If you project a 4:3 image onto a 16:9 screen,
z
the image may distort or some portions may
be cropped. Select an aspect ratio (4:3) which
preserves the intention of the image creator.
5HPDUNV
The order of
z
ASPECTW\SHVLVGH¿QHGQRWRQO\E\
the input method but also by the input signals.
If you project a copyrighted image enlarged or
z
distorted by using ASPECT function in commercial
use in a public place, such as a restaurant or hotel,
you might infringe on the copyright of the creator
which is protected by copyright law.
)5$0(/2&.
If the projected image is degraded, you can activate
)5$0(/2&. for synchronisation. (Available with
signals of RGB only)
Change setting
Change setting
ON Active
2)) Deactive